The only way to know for sure is to check your bearings. That being said, the most common 4-bolt configuration is a 4 on 4 bolt pattern, which are typically found on 2,000 lb to 2,700 lb trailer axles. The only 4 on 4 bolt pattern hub and drum assemblies we carry are for 2,200 lb axles and use # L44649 inner/outer bearings. See below.
Compatible with 7 inch x 1-1/4 inch electric and hydraulic brakes
# 8-173-16UC3 - Includes bearings, races, grease seal, standard grease cap and lug nuts.
#... view full answer...
The diameter of the pilot hole - where the grease cap will be - of the Dexter Trailer Idler Hub Assembly for 6,000-lb Axles - 6 on 6 - Agricultural # 42660UC1 is 2.446 inches.
The correct grease cap to use with this hub is Grease Cap # F001520.
This hub does not come with bearings, races, grease seal or cap so you will also need Bearing Kit # BK3-300.
This kit has all the correct bearings, races and seal for this hub. I have added links to video reviews for you to check out as well. view full answer...
The etrailer Trailer Axle Beam # e23GR will use the common bearing sizes for a 6,000lb axle with #42 Spindle.
Inner Bearing # 25580
Inner Race # 25520
Outer Bearing # 15123
Outer Race # 15245
Grease Seal # GS-2250DL
Grease Cap # DC250L-DCRP
This axle would pair well with the Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-458-459 and the etrailer Easy Grease Trailer Hub and Drum Assembly # AKHD-655-6-EZ-K which come preloaded with the parts I listed above installed and bearings pre-greased... view full answer...
I went out to the warehouse and found that the TruRyde Grease Seals # RG06-020 that you referenced are 1/4" thick. If the ID and OD are correct for your application then this is the correct set of grease seals for you as those are the determining factors. view full answer...
The inner diameter of bearing # L44649 is 1.063 inches. The inner diameter of bearing # L68149 is 1.378 inches. Both fit on a #84 spindle.
The matching race for bearing L44649 is # L44610. And the matching race for bearing L68149 is # L68111.
These bearings and races along with a grease seal associated with them (10-19 seal), cotter pin, and tang washer are available together in a kit, # BK2-100. The seal inner diameter is 1.719 inches. view full answer...
The # RG06-070 grease seal included with the # BKS-200 bearing kit is .375 or 3/8 of an inch thick.
The corresponding race to the 14125A bearing is a 14276 which has an outside diameter of 2.717 inches. The 25520 race is used with the 25580 bearing, and it has a 3.265 outside diameter. view full answer...
The lug nuts, grease cap, bearings, races and grease seals are included with the # 8-213-5UC1 hub you mentioned.
The wheel studs are 1/2 inch diameter, 20 threads per inch. view full answer...
Dexter 6K Trailer Axle Kit # 7461121-EB, which includes electric drum brakes and hubs, has a round tubing outside diameter of 3-inches. The axle's hub face spacing is 95-inches and the spring center spacing is 80-inches center to center. The axle-only kit # 7461121 has the same axle tube.
In addition to the axle tube, brakes and hubs, this Dexter kit also includes bearings, races, seals, grease caps, wheel studs, lug nuts, and marine-grade wheel bearing grease. view full answer...
In order to make sure you get the correct bearings for your Fleetwood, you will need to remove the bearings that are currently installed. Bearings can have the same outside dimension but the inside diameter can vary. I have attached a photo with that shows where you can typically find the numbers on the bearings, race, and seal. That is the best way to make sure you get the correct replacement.
If you are unable to find those numbers you will need to measure the spindle with a precision... view full answer...
The bearing size on your 5200 lbs Rockwell torsion axle trailer is 1.75" I.D. pn 25580 for the inner bearing and 1.250" I.D. pn 15123 . The Inner race is 3.265” O.D. pn 25520 and the outer race is 2.441” O.D. pn 15245 . The 2.25" I.D. double lipped grease seal is item # GS-2250DLGS-2250DL.
The kit for your 5200 lbs Rockwell trailer is Bearing Kit, LM67048/25580 Bearings, 10-36 Seal item # BK3-300. view full answer...
It's odd for sure what you mentioned but to be sure about the seal we'd also need to know the diameter on the hub where the seal installs to be sure we have a fit for it since what you have seems to be non-standard. If that measurement is 1.983 inch then the seals part # RG06-010 is what you'd need with the bearings part # L44649 and race # L44610 if those were needed as well.
If you find a different dimension let me know. view full answer...
The hub ratings are for the axle capacity, and not the trailer weight capacity.
For example, The trailer hubs you came from, part # AKIHUB-545-35-EZ-K is designed for 3,500 lb axles. This hub includes the bearings races, seals, grease cap, and lug nuts. The individual hub capacity is 1,750 lbs. view full answer...
On the TruRyde Bearing Kit, part # BK1-150, the bearing race would be the TruRyde Race, part # L44610, which has an outside diameter of 1.980 inches.
The bearings are the TruRyde Bearing, part # L44649, which has an inside diameter of 1.063 inches, which is about 1-1/16 (1.062) inches.
The bearing seal is the TruRyde Grease Seal, part # RG06-020, which has an inside diameter of 1.5 inches and an outside diameter of 1.987 inches. view full answer...
The bearing races will be installed on the Kodiak Hub and Rotor Assembly, # KHR12D. The bearings for the hub are # 25580 for the inner and # 15123 for the outer.
We offer a Bearing Kit, # BK3-100, that includes both bearings # 25580 and # 15123, but also the grease seal 10-36 with an inside diameter of 2.25 inches. view full answer...
I went to the warehouse and measured the # AKIHUB-545-2-2K you asked about.
I have attached a photo of the hub with the dimension you asked for. The hub depth outside to outside is 4 inches. This is an idler hub assembly for 2,000-lb axles and will work with 8-inch to 12-inch wheels. This has a 5 on 4-1/2 bolt pattern and the hub assembly comes with bearings, races, seal, grease cap, and lug nuts included. view full answer...
The #84 Spindle # TRU24FR is 8-1/4" long with a 2" diameter stub. This spindle will fit the following bearings and components, which are all sold separately:
Bearings-
Inner bearing: # L68149 (1.378" inner diameter)
Outer bearing: # L44649 (1.063" inner diameter)
Races-
Inner race: # L68111
Outer race: # L44610
Grease seal: # 58846
Inner diameter: 1.719"
Outer diameter: 2.565" view full answer...
The AxleTek # AKIHUB-545-35-G-EZ-K hub you'd looked at uses 1/2 inch-20 wheel studs. 1/2 inch diameter, 20 threads per inch. The lug nuts are included with the hub, as are the bearings, races, grease seal and the EZ Lube grease cap.
We don't carry TDE parts, but from my research, I've found that the # AKIHUB-545-35-G-EZ-K is a direct replacement for their 46210 hub.
If you click the provided links, you can see an install and a product description video. view full answer...
The hub and drum assembly you referenced, Dexter # 8-201-5UC3, uses outer bearing # LM67048 which has an inner diameter of 1.250-inches. The supplied matching race, part # LM67010, has an outer diameter of 2.328-inches. We offer these parts individually as well as along with the matching inner bearing, race, grease seal and cotter pin as kit # BK3-310. view full answer...
The bearing kit # DL21792 has 2 of bearing # L44643. This bearing has an inner diameter of 1 inch. The matching race is # L44610. It has an outer diameter of 1.980 inches.
The seal is # 34823. It has an inner diameter of 1.249 inches and an outer diameter of 1.983 inches. All of these items are for use with a BT8 spindle like # TRU94FR.
You can get these bearings here at etrailer of course. Local farm supply stores may also have them. They are not a common automotive size so an auto parts... view full answer...
Go To Results